ProfitPlate

Cost per Serving Calculator

Enter each ingredient as it arrives on the invoice — pack price, pack size, the trimmed amount your recipe uses and its yield — plus the servings the batch makes. You get the true edible-portion cost per kilo of every line, the batch cost, cost per serving and per 100 g, and a yield test for weighing your own trim.

Ingredients, as you buy them

Pack price and size as on the invoice. “Used” is the trimmed, edible-portion amount the recipe needs; the yield turns it back into what you had to buy. Leave a line blank to skip it.

Ingredient 1
Ingredient 2
Ingredient 3
Ingredient 4
Ingredient 5
Ingredient 6

The batch

Portions this batch is divided into
Checks the serving count against the cooked weight
Evaporation and shrinkage; 0 for cold dishes

Yield test (optional)

Weigh the whole item before you touch it
After peeling, trimming, boning
Gives the true cost per usable kg

Cost per serving

—

IngredientEP costServings / packCost
Batch cost—
Cost per 100 g, as served
—
Overall yield, bought → served
—
Weight bought → weight served
—
Servings by weight at 350 g
—
Yield test: EP ÷ AP
—
Yield test: true cost per usable kg
—

Next step: turn cost per serving into a menu price and food cost % with the recipe food cost calculator.

How to calculate cost per serving

Cost per serving is the batch cost divided by the number of servings the batch makes. The hard part is the batch cost, because the price on the invoice is for the ingredient as purchased (AP), with skins, tops, bones, fat and brine, while the recipe uses the edible portion (EP) left after you have prepared it. Yield is the bridge between the two.

Yield % = EP weight ÷ AP weight × 100 AP cost per kg = pack price ÷ pack weight EP cost per kg = AP cost per kg ÷ yield % Amount to buy (AP) = amount the recipe uses (EP) ÷ yield % Line cost = amount to buy × AP cost per kg Batch cost = Σ line costs Cost per serving = batch cost ÷ servings Cost per 100 g = batch cost ÷ weight as served × 100

Why is the price per kilo on the invoice a lie?

Because you cannot serve the whole kilo. Onions at $1.20 a kilo lose their skins and ends: at an 89% yield the kilo you can actually cook costs $1.35. A whole beef chuck at $12.00 a kilo that loses a fifth of its weight to fat and sinew costs $15.00 for every kilo that reaches the pan. The invoice price is right for the accounts and wrong for the recipe. Costing a recipe from AP prices understates every trimmed ingredient by its waste, and the error is largest on exactly the lines that cost the most, meat and fish. The calculator asks for the trimmed amount the recipe uses and the yield, then converts both back into what you had to buy.

A worked example: beef stew, 36 servings

IngredientBought asUsed (EP)YieldEP costLine cost
Beef chuck, whole$60.00 / 5 kg4 kg80%$15.00 / kg$60.00
Onions$6.00 / 5 kg1.5 kg89%$1.35 / kg$2.02
Carrots$5.00 / 5 kg1.2 kg82%$1.22 / kg$1.46
Potatoes$9.00 / 10 kg2.5 kg85%$1.06 / kg$2.65
Beef stock$15.00 / 10 l4 l100%$1.50 / l$6.00
Chopped tomatoes$4.50 / 2.5 kg1.6 kg100%$1.80 / kg$2.88
Batch cost$75.01

To get 4 kg of trimmed beef at an 80% yield you must buy 5 kg, the whole pack, so the beef line costs the full $60.00 rather than the $48.00 an AP costing would show. The batch costs $75.01 and is split into 36 servings: $2.08 each. The six ingredients weigh 14.8 kg trimmed (counting the stock at a kilo per litre) and simmer down 15% to 12.58 kg, so the stew costs $0.60 per 100 g as served and a 350 g portion costs $2.09. That is almost exactly 36 portions of 350 g, so the serving count and the portion size agree. Overall, 16.69 kg bought becomes 12.58 kg served: a 75.4% yield from invoice to plate. The 80% beef trim follows the open textbook's roast example; your own chuck may trim better or worse, which is what the yield test is for.

What yield should you expect?

Published yield charts are a starting point, not a substitute for weighing. The Culinary Institute of America's Kitchen Calculations handout gives approximate yields for fruit and vegetables, and the open textbook Basic Kitchen and Food Service Management works through yield tests on whole proteins. The figures below are theirs, not ours.

IngredientApproximate yieldSource
Onions, large89%CIA chart
Carrots, no tops82%CIA chart
Potatoes, chef85%CIA chart
Celery75%CIA chart
Lettuce, iceberg74%CIA chart
Broccoli61%CIA chart
Cauliflower45%CIA chart
Mushrooms97%CIA chart
Peppers, green82%CIA chart
Pineapple52%CIA chart
Beef tenderloin, whole, trimmed70%BC textbook yield test
Salmon, whole sockeye, to fillet64.5%BC textbook yield test
Pork loin, to usable meat52%BC textbook yield test
Leg of lamb, roasted and boned43% saleableBC textbook cooking loss test

There is no published figure here for a whole chicken or a beef chuck roll: both vary too much by spec, size and butcher to quote responsibly. Weigh one delivery as it arrives and again after breaking it down, enter both weights in the yield test, and you have your own number plus the true cost per usable kilo. The yield test loads the CIA's own worked example, scaled to a 5 kg sack: 50 lb of potatoes peel down to 42.5 lb, an 85% yield, so the stew's potatoes at $0.90 a kilo on the invoice cost $1.06 a kilo once peeled.

How do you read the result?

Cost per serving is the number you price from; cost per 100 g is the number you compare with. Two stews with different portion sizes cannot be compared per serving, but they can per 100 g, and per-100 g cost is what tells you whether to bulk a dish with potatoes or with beef. The portion check matters more than it looks: if the batch weighs 12.6 kg cooked and you have told the calculator it makes 36 portions of 350 g, the numbers agree; if you have told it 48, either the portions are smaller than the spec or the batch is being stretched, and the cost per serving is wrong by exactly that ratio. Cooking loss is different from trim: it changes the weight you serve, not the cost of the batch, so it moves cost per 100 g and portions by weight but never the cost of a serving counted by number.

Two things to do with the number

Yield-test your most expensive lines. Meat and seafood tend to be both the costliest ingredients and the ones with the most trim; weighing each on a couple of deliveries replaces the chart with your own figures. Re-run it when the invoice changes. Because yield multiplies the invoice price, a $1.00 rise on beef chuck is a $1.25 rise per usable kilo at 80%: trimmed ingredients are where a price rise hurts most.

This page stops at cost. To turn $2.08 a serving into a menu price, a food cost percentage against industry benchmarks and the gross profit per plate, take it to the recipe food cost calculator, which prices single plates with the same unit conversion and yield fields.

Figures last reviewed · produce yields from the Culinary Institute of America's Kitchen Calculations chart; protein yields from the BCcampus open textbook's worked tests; whole chicken and beef chuck have no published figure here and should be measured in your own kitchen.

Sources: Culinary Institute of America, Kitchen Calculations: yield percentage and approximate yields of fruits & vegetables (PDF, 2023), BC Cook Articulation Committee, Basic Kitchen and Food Service Management (BCcampus Open Education, 2015), ch. 12 Yield Testing, Basic Kitchen and Food Service Management (BCcampus, 2015), ch. 13 Cooking Loss Test.

Frequently asked questions

How do you calculate cost per serving?

Cost every ingredient as you had to buy it: the trimmed amount the recipe uses divided by its yield, multiplied by the pack price per unit. Add the lines to get the batch cost and divide by the number of servings. A $75.01 batch of stew that makes 36 servings costs $2.08 a serving. Divide the batch cost by the cooked weight instead and you get cost per 100 g, which is the better number for comparing dishes.

What is the difference between AP and EP cost?

As-purchased (AP) cost is the invoice price per kilo of the ingredient as delivered, skins, bones and trim included. Edible-portion (EP) cost is the price per kilo of what is left after preparation: AP cost divided by the yield. Onions at $1.20 a kilo with an 89% yield have an EP cost of $1.35; a 5 kg roast at $8.00 a kilo that trims to 4 kg costs $10.00 per usable kilo.

How do you calculate yield percentage?

Weigh the ingredient as delivered (AP), prepare it, weigh what you can use (EP) and divide: EP ÷ AP × 100. Fifty pounds of potatoes that peel down to 42.5 lb have an 85% yield. Test several deliveries and average the results, because the size and freshness of the product and the skill of the person trimming it all move the figure.

What yield percentage should I use for onions, carrots and potatoes?

The Culinary Institute of America's chart gives about 89% for large onions, 82% for carrots without tops and 85% for chef potatoes (81% for red and 80% for sweet potatoes). Use those to start, then weigh your own: the CIA notes that smaller carrots, less-fresh produce and less-skilled trimming all lower the yield.

Does cooking loss change cost per serving?

Not when servings are counted by number. Cooking loss changes the weight you have to serve, not what the batch cost, so it moves the cost per 100 g and the number of portions of a fixed weight you can take from the pot. If you portion by weight, a 15% reduction means fewer 350 g portions from the same batch and each one costs more, which is why the calculator shows servings by weight next to the serving count.