ProfitPlate

Recipe Food Cost Calculator

Add each ingredient the way you buy it — price, pack size and how much the recipe uses — and get the exact plate cost, food cost percentage and the menu price that hits your target.

Ingredients

Pricing

Excluding sales tax / VAT
Full-service restaurants aim for 28–35%

Cost per portion

—

Recipe (batch) cost—
Food cost %
—
Gross profit / portion
—
Price for 30% food cost
—
Current price
—

How to calculate food cost for a recipe

Food cost percentage is the share of a dish’s selling price that goes on ingredients. To get it right you need the cost of what actually ends up on the plate, which means costing every ingredient from the pack you bought, and allowing for waste.

Ingredient cost = price paid × (amount used ÷ yield) ÷ pack size Cost per portion = Σ ingredient costs ÷ portions Food cost % = cost per portion ÷ menu price × 100 Menu price = cost per portion ÷ target food cost %

Example: chicken thighs at $8.50 per kg, 180 g per plate, 85% yield after trimming. You need 180 ÷ 0.85 ≈ 212 g as purchased, which costs $1.80 — not the $1.53 you’d get by ignoring trim.

A worked example: chicken curry, one portion

IngredientBought asUsed per plateYieldCost
Chicken thighs$8.50 / kg180 g85%$1.80
Basmati rice$2.20 / kg90 g100%$0.20
House curry sauce$6.00 / l120 ml100%$0.72
Plate cost$2.72

At a $13.50 menu price that plate runs at a 20% food cost and leaves $10.78 of gross profit. Move the chicken to $9.50 per kg and the plate cost becomes $2.93: still only 22%, but 21 cents gone from every portion sold, which is exactly the kind of drift this calculator is for.

What “yield” means

Yield is the usable percentage of what you buy. Onions lose their skin and ends (around 90% yield), whole fish can drop below 50% after filleting, and meat shrinks when cooked. Enter the amount the recipe needs in its prepared state, and the yield turns it back into the amount you actually had to buy. If you already weigh ingredients as purchased, leave yield at 100%.

Units

Pack and recipe units can differ as long as they measure the same thing: g, kg, oz and lb are all weight; ml and l are volume; pcs counts items (eggs, buns, lemons). Converting weight to volume needs a density, so if a recipe uses 15 ml of oil from a 1 kg tub, enter the tub as roughly 1.09 l (oil is about 0.92 g/ml) or measure the oil in grams.

What’s a good food cost percentage?

Most full-service restaurants land between 28% and 35%; pasta, soups and drinks often run far lower, pizza a little lower at 25–30%, while steaks and seafood run higher. The percentage matters less than the cash: a steak at 40% food cost can still earn more per plate than a salad at 20%. Use the target to set a starting price, then check the gross profit per portion. To measure food cost for a whole week or month from stock counts and purchases, use the food cost percentage calculator.

ConceptRule-of-thumb range
Quick-service and pizza25–30%
Casual dining28–32%
Full-service restaurant28–35%
Fine dining30–38%
Bakery and café20–30%
Bar and pub food20–25%

These are rules of thumb used across the industry, not measured averages. The National Restaurant Association's 2024 medians were 32.0% of sales for full-service and 32.4% for limited-service restaurants. Published vendor benchmarks differ from each other and from these ranges: Restaurant365 (2026) gives quick service 27–32%, fast casual 26–30%, casual dining 28–33%, fine dining 28–35% and pizza 22–28%, while Toast (2025) gives quick service 28–32%, casual dining 32–36% and fine dining 28–32%.

Keep it current

A recipe cost is only accurate until your next supplier invoice. When dairy, oil or protein prices move, re-run your best-sellers — small increases across many ingredients add up quickly.

Figures last reviewed .

Sources: NRA, 2025 Restaurant Operations Data Abstract (food cost), Toast, How to price food to sell (2025), Restaurant365, Food cost benchmarks by concept (2026).

Frequently asked questions

How do you calculate food cost percentage?

Divide the ingredient cost of one portion by its menu price (before tax) and multiply by 100. A dish that costs $3.60 to make and sells for $12 has a 30% food cost.

What is a good food cost percentage for a restaurant?

Many restaurants aim for roughly 28–35% overall, but it varies by dish: drinks, pasta and soups often run well below that, pizza a little below at 25–30%, while steak and seafood run higher. Look at gross profit per plate as well as the percentage.

What is yield percentage in recipe costing?

Yield is the usable share of an ingredient after trimming, peeling, boning or cooking loss. If 1 kg of whole chicken gives 700 g of usable meat, the yield is 70%, so every 100 g on the plate actually costs you 143 g worth of purchase.

How do I cost an ingredient bought in a different unit than the recipe uses?

Convert both amounts to the same unit, then take the fraction of the pack you used. For example, 150 g of rice from a 20 lb bag is 150 ÷ 9,072 g = 1.65% of the bag. The calculator does this for weight (g, kg, oz, lb), volume (ml, l) and pieces.

How often should I recalculate recipe costs?

Whenever supplier prices change noticeably — for most kitchens that means reviewing best-sellers at least monthly, and immediately after a price rise on proteins, dairy or oil.