ProfitPlate

Restaurant Occupancy Cost Calculator

Enter your rent, service charges, property tax and insurance alongside monthly sales, seats and floor area to see rent and total occupancy cost as a share of sales, rent per seat and per square foot, the rent your sales can actually carry, and how you compare with the National Restaurant Association’s 2024 medians.

Occupancy costs per month

Rent only; add the extras below
Common-area maintenance, service charge, levies
Property tax or business rates, per month
Premises cover you pay, not liability
Gas, power, water, waste — counted only if ticked

Sales and space

Net sales, excluding sales tax / VAT
Dining seats; 0 if takeaway only
Whole leased area, kitchen included

Rent to sales

—

Base rent—
CAM, property tax, insurance—
Total occupancy cost per month—
Occupancy cost, % of sales—
Max rent for rent ≤ 6% of sales—
Max rent for occupancy ≤ 10%—
Rent your sales can carry—
Rent per seat per month
—
Sales per seat per month
—
Rent per sq ft per year
—
Sales per sq ft per year
—
Sales needed for rent ≤ 8%
—
vs NRA 2024 median
—

How to calculate restaurant occupancy cost

Occupancy cost is everything you pay to occupy the building: base rent, the common-area maintenance (CAM) or service charge, property tax — business rates in the UK — and the insurance on the premises. Accountants ORBA define it as rent or mortgage payments plus the related taxes, fees, insurance and triple-net charges. Utilities are usually tracked separately, so the calculator leaves them out unless you tick the box; equipment leases, liability insurance and repairs belong elsewhere on the P&L. Rent-to-sales is the narrower ratio — base rent alone against sales — and the one landlords, brokers and lenders quote. Both are measured on net sales, excluding sales tax or VAT.

Rent-to-sales % = monthly base rent ÷ monthly sales × 100 Occupancy cost % = (rent + CAM + property tax + insurance [+ utilities]) ÷ sales × 100 Rent per seat = rent ÷ seats Rent per sq ft per year = rent × 12 ÷ floor area Sales per sq ft per year = sales × 12 ÷ floor area Rent you can afford = lower of 6% × sales and 10% × sales − other occupancy costs Sales needed = rent ÷ 8%

Why does the ratio matter more than the rent?

$6,000 a month is cheap for one restaurant and ruinous for another; the figure means nothing until it is set against sales. Rent is the one large cost that does not flex: food and hourly labour fall on a quiet week, the lease does not. At a 6% target every $1,000 of monthly rent commits you to roughly $16,700 of monthly sales, so the ratio tells you what the lease is really asking of you and how much of a sales dip you can absorb before it eats the margin. It is also the language of the lease itself — percentage-rent clauses are written as rent against sales — and the measure the National Restaurant Association reports, which lets you compare your site with the industry rather than with the unit next door.

Worked example: a 60-seat restaurant on $95,000 a month

Base rent $6,000, CAM $800, property tax $450 and building insurance $250 make $7,500 of occupancy cost against $95,000 of monthly sales. Rent-to-sales is 6.3% and total occupancy 7.9%: occupancy is inside the 10% rule, rent is a shade over the 6% one, and both sit about two points above the NRA’s 2024 full-service median of 5.7%. Per seat, rent is $100 a month against sales of $1,583; per square foot of the 2,400 sq ft unit, rent is $30 a year against sales of $475, so the building turns over almost sixteen times its rent. At these sales the 6% rule allows $5,700 of rent and the 10% rule $8,000, so $5,700 is the binding figure. For the current $6,000 to sit at 8% you need $75,000 of sales, which this restaurant already clears: sales could fall 21% before rent reached 8%.

What a healthy occupancy cost looks like

BenchmarkFigureSource
Rule of thumb: base rent6% of sales or lessBaker Tilly benchmarks, cited by Restaurant Business
Rule of thumb: total occupancy10% or less; 6–10% typicalBaker Tilly; ORBA (2023); HigherMe
Rent plus utilities5–10% of sales7shifts (2025)
Full-service median, 20245.7% (urban 6.0%, suburban 5.5%, small town 5.4%)NRA, 2025 Restaurant Operations Data Abstract
Limited-service median, 20245.2% (urban 6.0%, suburban 5.0%, small town 3.2%)NRA, 2025 Restaurant Operations Data Abstract

The medians sit below the targets, which is the point: a typical restaurant pays five to six cents of every sales dollar for its building, and the 6% and 10% lines mark where the cost starts to crowd out the 2.8–4.0% median pre-tax margins the NRA reports. A new restaurant usually runs above both in its first year because rent starts on day one and sales ramp over months; the test is whether the ratio is falling by the second year. Pick your segment and location above to compare against the matching median.

How do you fix a bad rent-to-sales ratio?

Rent is fixed, so the ratio only moves through the sales side — unless you reopen the lease. Three routes, in the order most operators can act on them:

1. Raise sales per seat

Occupancy per seat in the example is $125 a month and sales per seat $1,583. One more turn on Friday and Saturday evenings — 60 covers at a $28 average check, twice a week — adds about $14,500 a month and takes rent from 6.3% to 5.5% of sales without touching the lease. Average check moves it the same way: a dessert or a second drink is worth more here than anywhere, because every extra dollar lands on a cost that does not change.

2. Use the hours you already pay for

The lease covers 24 hours a day; most restaurants sell for eight of them. A breakfast or lunch daypart, a takeaway and delivery window, a bar hour before service, or renting the kitchen to a delivery-only brand on dark days all add sales with no extra rent. $500 a day of delivery over 26 days is $13,000 a month, which on its own brings the example’s rent to 5.6% of sales.

3. Renegotiate with the ratio in hand

Landlords would rather keep a paying tenant than find a new one, and a ratio is a stronger argument than “it feels expensive”. Ask for a percentage-rent structure — lower base rent plus a share of sales above a breakpoint — a CAM audit and cap, a rent-free period against a fit-out, or a shorter term with options to renew. “Rent is 6.3% of sales against an industry median of 5.7%” is a sentence you can take into the meeting.

Figures last reviewed · NRA medians are 2024 figures from the 2025 Restaurant Operations Data Abstract; the 6% and 10% lines are industry rules of thumb, not survey data.

Sources: NRA, occupancy costs in 2024 (September 2025), NRA, 2025 Restaurant Operations Data Abstract press release (August 2025), NRA, restaurant profitability commentary, July 2026, Restaurant Business, prime cost and occupancy percentages (Baker Tilly benchmarks), ORBA, Benchmarking helps restaurants measure their performance (October 2023), HigherMe, The simplified guide to restaurant benchmarks, 7shifts, Restaurant costs (February 2025).

Frequently asked questions

What is a good rent-to-sales ratio for a restaurant?

The common rule of thumb is base rent at or below 6% of sales and total occupancy cost — rent plus CAM, property tax and insurance — at or below 10%. The National Restaurant Association’s 2024 medians were lower still: 5.7% of sales for full-service restaurants and 5.2% for limited-service, with urban sites in both segments at 6.0%.

What is included in restaurant occupancy cost?

Base rent or mortgage payments, common-area maintenance or service charges, property tax (business rates in the UK) and the insurance on the building. Many operators also count utilities, so the calculator lets you include them with a tick. Equipment leases, liability insurance, repairs and the kitchen fit-out are not occupancy costs.

How much rent can a restaurant afford?

Work back from sales: at the 6% rule a restaurant expecting $95,000 of monthly sales can afford about $5,700 of base rent and $9,500 of total occupancy cost. For a new site, use a conservative sales forecast and treat 8% as the ceiling, because rent starts on day one while sales take months to build.

How do I calculate rent per square foot for a restaurant?

Multiply the monthly base rent by 12 and divide by the leased floor area, kitchen included: $6,000 a month on 2,400 sq ft is $30 per sq ft per year. Compare it with sales per square foot — annual sales divided by area, $475 in the worked example — rather than with asking rents alone, because a dearer unit that sells more can be the cheaper one.

Is 10% rent too high for a restaurant?

Base rent at 10% of sales is well above the usual 6% target and almost double the NRA’s 2024 medians, and once CAM, tax and insurance are added occupancy is likely 12–14%. It can work for a high-margin concept or a site in its first year, but it leaves little of the 2.8–4.0% median pre-tax margins restaurants earn. Raise sales per seat, add dayparts or renegotiate.